AquaFinesse Hot Tub Water Care Box

AquaFinesse Hot Tub Water Care Box Trichlor

AquaFinesse Hot Tub Water Care products are the best water care products available. They contain everything you need for the water treatment of your hot tub. No more time-consuming measurements and no collection of chemical products to maintain your hot tub water. With AquaFinesse, you can spend less than five minutes on the water maintenance of your spa. In addition, you make an environmentally conscious choice.

What makes AquaFinesse unique?

Everyone has probably had the experience that the walls of your hot tub felt slippery. As if there is a layer of slime on the walls. This is called a biofilm. It is where many bacteria nest. Traditional products such as chlorine, for example, hardly get through this layer (biofilm), which means that a very large amount is required to reach the bacteria. As a result, a very high dose of disinfection ends up in the water. This causes negative side effects for your skin, eyes and breathing. And nobody wants that. Unlike other products, the unique patented AquaFinesse formula is able to soak this biofilm layer away from the walls and break it open, preventing the bacteria from hiding. Now all you need is a little disinfection.

With just one dose per week, AquaFinesse ensures clean, silky soft and crystal-clear water. In addition, the AquaFinesse formula ensures that your hot tub components last longer because it avoids the accumulation of limescale in your hot tub / spa!

Note: Do you have an inflatable hot tub? Then check out our AquaFinesse Inflatable Spa Water Care box. This is specially tailored to the inflatable hot tub.

Download user manual Where to buy View product video

Simple weekly treatment

1. Shake the bottle of AquaFinesse before use.
2. Add the prescribed amount to the spa water using the measuring cup (for the correct dosage see the label on the back of the bottle).
3. Place an SWE disinfectant tablet 90 (weekly) in the dispenser supplied.
Then place the dispenser above the filter.
4. Open all valves and jets. Allow the pumps to run at full power for approx. one minute.
5. Rinse the filters with clean water, or clean them with AquaFinesse Filter Cleaner tablets.

Spa manufacturers recommend changing the water at least once every 3–4 months.

Contains:

Water Care Bottle 2L

Jar tri-chlorine tablets

Measuring Cup

Why AquaFinesse?

The water maintenance of a hot tub, swimming pool or swim spa is often difficult and complicated. Most people find balancing the pH, alkalinity and disinfectant a time-consuming task. What if we tell you that AquaFinesse water treatment products simplify water maintenance and save you valuable time in water maintenance?

Clean, silky soft and crystal-clear water

The water quality of the hot tub, swimming pool or swim spa is of the utmost importance. Not only for hygienic and safety reasons, but also because good water treatment extends the life of your hot tub, swimming pool or swim spa. AquaFinesse water treatment applies a groundbreaking, proven technology that tackles the living environment of the bacteria in your spa water. As a result, only a minimal amount of disinfection is required.

Use AquaFinesse once a week and enjoy clean, crystal-clear water, while preventing the re-growth of bacteria in your swim spa, hot tub or swimming pool.

Green, healthy and certified.

AquaFinesse is environmentally friendly, safe and gentle on your skin. The pleasant AquaFinesse scent comes from organic lavender grown in the French countryside. AquaFinesse water maintenance products have been tested and certified by a large number of independent testing organisations around the world.

FAQ

Here is a selection of the most frequently asked questions. If you have any other questions, please contact us using the contact form.

When should I change my water?

With normal use, you can go 3–4 months with your water. Is it the first fill of water? Then we recommend replacing it after six weeks. When it comes from the factory, the spa often still contains some contamination. Consider for example mould wax, sealant and glue residues. In addition, the spa is often tested before it leaves the factory and residual water remains in the pipes.

How often should I change the water in my spa or hot tub?

Our rule of thumb is to change the spa or hot tub water every 3 to 4 months. This is the same frequency as Spa manufacturers recommend. Over time, water loses its minerals and calcium causing the pH to fluctuate which can no longer be stabilized.

If you have a new spa, we recommend to change the water the first time a bit sooner. Due to factory testing waters debris that will come loose in the first period and the fact that most new spa’s will be used intensive during the first weeks. (friends/family/neighbours will visit most likely)

Do I need to shower before I use the spa?

It is advisable to shower in advance. The cleaner you go in the hot tub, the longer your water lasts.

Can I fill my spa with softened water?

It may sound strange, but we do not recommend using softened water. To keep the water balanced, the water in a spa needs lime. If you still want this, we recommend filling only 50% with softened water and the other 50% with normal water.

Do I need to measure my pH weekly?

AquaFinesse ensures that your pH remains stable. When using AquaFinesse, the pH will be between 7.2 and 8.2. So you don’t have to do anything.

I have foam on my water. What do I do now?

There are two types of foam. First of all, white foam. This could be because you have a new spa. If it is the first fill of water, we recommend replacing it if it is more than six weeks old. Other causes are often care products, such as: body lotion, hairspray/gel and make-up.

There is also brown foam. This is caused by organic contamination or if your water is too old. Replacing the water is then the only option.

My spa has a salt system. Can I use this in combination with AquaFinesse?

Unfortunately, you cannot use AquaFinesse in combination with a salt system.

FAQ

Here is a selection of the most frequently asked questions. If you have any other questions, please contact us using the contact form.

It is advisable to shower in advance. The cleaner you go in the hot tub, the longer your water lasts.

AquaFinesse ensures that your pH remains stable. When using AquaFinesse, the pH will be between 7.2 and 8.2. So you don’t have to do anything.

There is also brown foam. This is caused by organic contamination or if your water is too old. Replacing the water is then the only option.

Unfortunately, you cannot use AquaFinesse in combination with a salt system.

99.6% recommend AquaFinesse!

It’s no secret that people love our products all over the world. This is because our formula works and the products are easy to use.

What people say

Use the button below if you’d like to share an experience with us!

Leave us a review

We love the AquaFinesse products!

They make it so much eassier than all the chemicals we used in the past.
AquaFinesse made us love our spa again!

Rob and Ashley

Dear AquaFinesse,

As I said before I love AquaFinesse for the crystal clear water, the soft non chlorine smell on our skin, the easy once weekly application but more so because of its environmental friendly.
My young grandson has extremely bad eczema with no bad effect after using the spa and this product was oneof the reasons we use and love it.

The Brookfield family

For years, we have used several different brands of chemicals for our spa. We were never sure if we were adding the right amount or the right products.
With Aquafinesse, there’s no wondering if we’ve added the right amount.

I convinced my mom to use it in her spa. She loves it and thanks us for telling her about it!

Gary and Gail McGinnis