$24.99
To maximize the enjoyment of your AquaFinesse hot tub water, it is essential to keep your filters clean, we recommend cleaning your filters at least once a week. To assist you with this, we at AquaFinesse have developed a fast acting, environmentally friendly ‘Fizz’ tablet to keep your filter in optimum condition.
Unlike traditional filter cleaning solutions which need a massive 24 hours soaking period, the AquaFinesse Filter Cleaner tablets whizz through your filters in just one hour! Important: Good water quality is dependent on a clean filter. Each box contains 20 individually wrapped filter cleaning tablets.
With normal use, you can go 3–4 months with your water. Is it the first fill of water? Then we recommend replacing it after six weeks. When it comes from the factory, the spa often still contains some contamination. Consider for example mould wax, sealant and glue residues. In addition, the spa is often tested before it leaves the factory and residual water remains in the pipes.
It is advisable to shower in advance. The cleaner you go in the hot tub, the longer your water lasts.
It may sound strange, but we do not recommend using softened water. To keep the water balanced, the water in a spa needs lime. If you still want this, we recommend filling only 50% with softened water and the other 50% with normal water.
AquaFinesse ensures that your pH remains stable. When using AquaFinesse, the pH will be between 7.2 and 8.2. So you don’t have to do anything.
There are two types of foam. First of all, white foam. This could be because you have a new spa. If it is the first fill of water, we recommend replacing it if it is more than six weeks old. Other causes are often care products, such as: body lotion, hairspray/gel and make-up.
There is also brown foam. This is caused by organic contamination or if your water is too old. Replacing the water is then the only option.
Our rule of thumb is to change the spa or hot tub water every 3 to 4 months. This is the same frequency as Spa manufacturers recommend. Over time, water loses its minerals and calcium causing the pH to fluctuate which can no longer be stabilized.
If you have a new spa, we recommend to change the water the first time a bit sooner. Due to factory testing waters debris that will come loose in the first period and the fact that most new spa’s will be used intensive during the first weeks. (friends/family/neighbours will visit most likely)
8230 Montgomery Road, Suite 150
Cincinnati, OH 45236